1. Setup & Preparation

✅Machine Inspection – Check rollers, fasteners, and electrical connections to ensure everything is secure and aligned. Look for any obstructions or wear on moving parts.

✅Power & Safety Check – Connect the machine to the correct power supply. Ensure emergency stop buttons and safety guards are functional.

✅ Material Loading – Place the raw metal coil (galvanized/stainless steel) on the decoiler, ensuring proper alignment to avoid material jams. Adjust the feeding guides for smooth entry into the rollers.

2. Operation Process

✅ Material Feeding – Gradually feed the metal sheet into the machine while ensuring proper alignment to avoid deformation.

✅ Parameter Setup – Use the control panel to enter required dimensions, such as length, width, and bending specifications. Check program settings before starting.

✅ Roll Forming Process – Start the machine and monitor the rollers shaping the metal into shutter door profiles. Adjust as necessary to maintain consistency.

✅ Cutting Mechanism – The integrated hydraulic or mechanical cutter will automatically cut the panels to the programmed length. Ensure smooth cuts without burrs or defects.

3. Post-Operation & Maintenance

✅ Quality Inspection – Check the finished shutter panels for accuracy, smooth edges, and uniform shape.

✅ Proper Shutdown – Stop the machine, turn off the power, and clean any metal debris from the rollers and cutting area.

✅ Routine Maintenance – Lubricate moving parts, inspect rollers for wear, and check electrical connections to ensure long-term efficiency. Replace worn-out components as needed.

By following these steps, you can maximize productivity, ensure consistent quality, and extend the life of your Shutter Door Roll Forming Machine.