1. Setup & Preparation

Machine Inspection – Check rollers, cutting blades, punching system, and electrical connections. Ensure all components are aligned and securely fastened.

Power & Safety Check – Connect the machine to the correct power supply and verify that emergency stop buttons and safety features are functional.

Material Loading – Place the steel coil (galvanized, stainless steel, or aluminum) onto the decoiler. Adjust feeding guides to ensure smooth and centered entry.

2. Operation Process

Material Feeding – Carefully guide the metal strip into the rollers, ensuring proper alignment to prevent deformation.

Parameter Setup – Use the control panel to set bracket dimensions (length, width, thickness) and adjust hole punching settings if needed.

Roll Forming Process – Press Start, and the rollers will gradually shape the material into the required solar bracket profile. Monitor the alignment and adjust settings if necessary.

Punching & Cutting – The hydraulic punching system will create mounting holes at precise locations, and the automatic cutter will cut the brackets to the programmed length.

3. Post-Operation & Maintenance

Quality Inspection – Check the brackets for dimensional accuracy, smooth edges, and correct punching hole placement.

Proper Shutdown – Turn off the machine, disconnect power, and clean the rollers and cutting area to remove metal debris.

Routine Maintenance – Lubricate moving parts, inspect rollers and cutting blades for wear, and check electrical systems regularly for consistent performance.

By following these steps, you can ensure efficient production, high-quality solar brackets, and long-term machine durability.