1. Pre-Operation Setup

Machine Inspection – Check rollers, cutting blades, hydraulic systems, and electrical connections to ensure all components are secure and aligned.

Power & Safety Check – Connect the machine to the correct power source. Test the emergency stop function and confirm safety guards are in place.

Material Loading – Mount the steel coil (galvanized, stainless steel) onto the decoiler and align it with the feeding guides for smooth entry.

2. Operating the Machine

Feeding the Material – Guide the steel strip into the rollers while ensuring it remains centered to prevent deformities.

Parameter Configuration – Use the control panel to set the guardrail length, width, and hole punching positions as per specifications.

Roll Forming Process – Start the machine and monitor the rollers as they shape the metal into a guardrail profile. Adjust settings if needed.

Punching & Cutting – The hydraulic punching system creates mounting holes at precise positions, while the automatic cutter ensures clean, accurate cuts.

3. Post-Production & Maintenance

Quality Inspection – Check the finished guardrails for proper dimensions, hole placement, and smooth edges.

Shutting Down – Turn off the machine, disconnect power, and remove any metal debris from the rollers and working area.

Routine Maintenance – Lubricate moving parts, inspect rollers and cutting blades for wear, and ensure hydraulic and electrical systems function properly.

By following these steps, you can maximize production efficiency, maintain product quality, and extend the lifespan of your Guard Rail Roll Forming Machine.